Full-open door tyre pyrolysis plant exported to USA

Tyre Pyrolysis plant 1. Environmental protection 2.Safty alarm system 3.National patent 4. ISO,SGS,CE certificate

Tyre Pyrolysis plant

Technical parameter:

No.	Item	Project
1	Equipment model	TS-6	TS-7
2	Door Model	Big door	Full open door
3	Suitable Raw Material	Tyre,Plastic,rubber products	Tyre,Plastic,rubber products
4	Structure	Horizontal type revolves	Horizontal type revolves
5	Capacity for one batch	About 5~10MT	About 5~10MT
6	Output(tyres for example)	40%-45%	40%-45%
7	Work pressure	Normal Pressure	Normal Pressure
8	Reactor Rotation speed	0.4 R/M	0.4 R/M
9	Fuels Choice	coal, wood, gas	coal, wood, gas, oil ,electric
10	Power	10~15 kw/h	10~15 kw/h
11	Cooling Method	Cycle Water	Cycle Water
12	Type of drive	External annular gear	External annular gear
13	Heating method	Direct	Direct
14	Type of installation	With foundation	With foundation
15	Noise dB(A)	≤85	≤85
16	Operating Mode	Intermittent operation	Intermittent operation
17	Total weight(MT)	25~32	25~32

Main of Characteristics of tyre pyrolysis plant:

1. National patent, Full open door: Speedy loading in and steel-drawing out, easily cooling down after one batch finished, saving time;

2. National Patent, Carbon black discharging system; completely enclosed design to prevent dust under high temperature;

3. National Patent, Gas scrubbers: remove acid gas and dust from smoke, meeting environmental protection standard;

4. National Patent, Outer Gearing Drive system: making the rotation and operation of the plants very stable, less noise;

5. National Patent: Special designed heat insulation shell;

6. Direct heating system: Enlarging heating square to enlarge the lifetime of reactors, easy to control the temperature;

7. High oil output and high oil quality;

8. Combustible gas recycling system: used as supporting fuel for the plants or compressed into LPG to save energy and Prevent pollution.

Final Products:

There are three kinds of final products: tire oil, crude carbon black, steel wires whose output and usage as follows:

Tire oil: 40%-45%, widely used as fuel oil for hotels, steel factories, etc... Or used for generates to get electricity.

Carbon black: around 35%, used for construction bricks or as filter of rubber products after process.

Steel wire: 12%-15%: sold or reprocessing.

Combustible gas: about 5%, can be recycled and used during process as fuel or collected even compressed into liquid gas, used as fuel or to get electricity.

Service and Support:

a. Know-how transfer, engineering and design of the whole process furthermore

b. We suggest following services for consultancy, supervision during the erection and commissioning with test run.

c. Our project engineer will go to the site and offer instruction for the machine installation, the commissioning and test run. 

Duration is totally 30 days, including travel time.

Full-open door tyre pyrolysis plant exported to USA